The HIASA SPM–IS4 Motorcyclist Protection System is a continuous protection device that can be installed on a new or existing steel road safety barrier installation.
The SPM–IS4 is a road safety device from HIASA, one of Spain’s leading steel product suppliers and is exclusively available in Australia through ACP.
The SPM–IS4 system provides the optimal solution for the two main hazards for motorcyclists if they impact steel road safety barriers.
A direct impact of the motorcyclist against the post barrier which can cause serious injuries, sometimes fatal.
The motorcyclist breaching the space between two posts leaving them exposed to the hazards the barrier is there to protect.
|HIASA Motorcyclist Protection Device for Guardrail Installation Manual||1 MB|
SPM–IS4 system passed full scale crash tests with real scale dummies in accordance to Spanish Standard UNE 135 900 ”Performance evaluation for motorcyclist protection safety barriers systems “. The tests are an impact of a 86.5kg dummy at 60km/h and 30 degrees angle, at two different impact points: straight into the posts and between two posts.
In addition to the dummy tests the SPM–IS4 system has also passed full scale crash tests with a four–wheeled vehicle, in compliance to European standard UNE–EN 1317–2, impact level N2, crash severity class A and working width W4. The results of these additional tests demonstrate that addition of IPM–IS4 does not alter the original guardrail system performance.
The SPM–IS4 system comprises of a continuous galvanised steel flat screen attached to the existing barrier by a bracket on each post.
The installation of the SPM–IS4 on barrier is simple and fast. On existing installations the barrier does not have to be dismantled to install the system.
SPM–IS4 system components are manufactured from steel plate hot rolled S235JR type and according to European standard UNE–EN 10025 and hot–dip galvanized according to European standard UNE–EN ISO 1461.
The H.I.C. index (Head Injury Criteria) that evaluates the risk of head injuries, has been 170 for the impact on post and 146 for the impact on the midpoint. The maximum allowable value is 1,000, the neck forces and moments measured during the tests, are within the limits corresponding to the minimum class of severity (Level 1).